Dynalyse Scanframe for panels, paper and webs


The OMNIR is an accurate and very robust non-contacting moisture meter suitable for a wide range of materials and applications. It measures the surface moisture (max 1 mm depth depending on material roughness) of the material. The OMNIR is used for many applications where measurement of surface moisture is critical, such as: sawdust and chips, powders (pharma, coffee, pet food) and granulatest (gypsum raw-material, nuts, sand), and other surfaces or panels (paper, carpets, boards). The innovative technical solution makes theOMNIR very robust, accurate and repeatable over time.

Enter your phone number or e-mail address below and we will contact you as soon as possible. Your information is saved after contact only after your consent.

    Surface moisture meter in production lines for various materials and applications

    The moisture meter OMNIR measures the surface moisture for various materials and fractions. Applications: panels, sawdust, chips, pellets, paper, grains, coffee, milk powder, nuts, textile and many more.

    The Finna Sensors OMNIR is installed in many plants around the world. Altogether, there are hundreds of systems installed from Finna Sensors to measure moisture in-line in various industries.


    • Measurement range 0-60% (standard)
    • High accuracy and repeatability
    • Less sensitive to disturbing light and temperature
    • Easy calibration
    • Measurement range; Min 0 – 0,1%, Max 0 – 60 % (standard)
    • Accuracy; dependent on range ±0,02% to ±0,2% units
    • Repeatability; within ±0,1% unit
    • Sampling rate; up to 50 Hz
    • Calibration function with up to 7 linear intervals
    • Distance to object; 230 mm ± 25 mm
    • Measured spot size: 1 cm2
    • Maximum depth: 1 mm
    • CE, RoHS

    Please tell us if a link has been outdated: e-mail.


    Denmark, Norway & Sweden

    Finland, Estonia, Latvia, Lithuania, Poland & Russia


    Switzerland, Germany & Austria